
Do you have a question about the M-Audio AUDIOPHILE 192 and is the answer not in the manual?
| Sample Rate | 192 kHz |
|---|---|
| Bit Depth | 24-bit |
| MIDI I/O | Yes |
| Interface | PCI |
| Phantom Power | No |
| Total Harmonic Distortion + Noise (THD+N) | < 0.002% |
| Digital Inputs | S/PDIF coaxial |
| Digital Outputs | S/PDIF coaxial |
| Supported Operating Systems | Windows, Mac OS X |
| Analog Inputs | 2 x 1/4" TRS, 2 x RCA |
| Analog Outputs | 2 x 1/4" TRS, 2 x RCA |
Specifies the minimum hardware and OS requirements for Windows users.
Specifies the minimum hardware and OS requirements for Macintosh users.
General steps for installing the Audiophile 192 driver and hardware.
Instructions for installing the M-Audio Delta software on Windows XP/2000.
Details the software installation process for Windows XP/2000, including restart prompts.
Step-by-step guide for physically installing the Audiophile 192 PCI card into the computer.
Instructions for physically inserting the PCI card and connecting cables.
Guide for installing the M-Audio Delta drivers using the Found New Hardware Wizard.
Instructions on handling the Windows Logo testing warning during driver installation.
Information regarding the lack of a Microsoft digital signature for the driver software.
Final steps for driver installation, including completing the wizard and rebooting.
Steps to install the M-Audio Delta software on Mac OS X 10.2.x (Jaguar).
Prompt for administrator password during Mac OS X installation.
Handling of the "Read Me" and License Agreement during Mac OS X installation.
Review and acceptance of the software license agreement for Mac OS X.
Selecting a destination disk and performing an "Easy Install" on Mac OS X.
Initiating the basic installation process for the M-Audio Delta software on Mac OS X.
Confirming software installation and restarting the computer on Mac OS X.
Physical installation steps for the Audiophile 192 PCI card after software installation on Mac.
Steps to install the M-Audio Delta software on Mac OS X 10.3.x (Panther).
Initial welcome screen and continuation prompt for the Panther installer.
Handling of the "Read Me" and License Agreement during Panther OS X installation.
Review and acceptance of the software license agreement for Panther OS X.
Selecting destination disk and initiating "Easy Install" on Mac OS X Panther.
Prompt for administrator password during Mac OS X Panther installation.
Confirming software installation and restarting the computer on Mac OS X Panther.
Physical installation steps for the Audiophile 192 PCI card after software installation on Mac.
Instructions for physically inserting the PCI card and connecting cables.
Step to restart the computer after hardware installation on Mac.
Description of the balanced/unbalanced 1/4" TRS main input connectors.
Description of the S/PDIF coaxial input connector on the PCI bracket.
Description of the balanced/unbalanced 1/4" TRS main output connectors.
Description of the balanced/unbalanced 1/4" TRS monitor output connectors.
Description of the S/PDIF coaxial output connector on the PCI bracket.
Description of the standard five-pin DIN MIDI input and output connector.
Explanation of the Monitor Mixer page and its fader controls for input sources.
Controls the level of the main audio stream output from the DAW to the monitor mixer.
Controls the level of audio stream output from DAW to S/PDIF digital outputs.
Controls mixer level for zero-latency monitoring of S/PDIF digital inputs.
Controls mixer level for zero-latency monitoring of analog inputs.
Provides output routing options for S/PDIF outputs and multi-card configurations.
Lists available audio sources for routing in the Patchbay/Router.
Selects the master clock source (Internal or S/PDIF In).
Allows selection of sample rate for recording new files and playback.
Manual setting of sample rate when synced to an external S/PDIF clock.
Options for synchronizing multiple Delta cards for simultaneous recording/playback.
Adjusts memory allocation for audio buffering to control latency and stability.
Disables DAW ASIO drivers from using the Monitor Mixer and Router.
Reverses the phase of associated input channels for phasing checks.
Selects between S/PDIF (Consumer) and AES/EBU (Professional) digital output formats.
Selects the audio source sent to the monitor mixer for S/PDIF input recording.
Outlines the warranty terms and limitations for M-Audio products.
Instructions and benefits of registering a new M-Audio product online.