
Do you have a question about the M-Audio DMP3 and is the answer not in the manual?
| Type | Microphone Preamplifier |
|---|---|
| Number of Channels | 2 |
| Instrument Input Impedance | 1MΩ |
| Inputs | 2 x XLR |
| Outputs | 2 x 1/4" TRS |
| Gain Range | 0dB to +60dB |
| Frequency Response | 20Hz - 20kHz |
| Phantom Power | +48V |
| Power Supply | AC power adapter |
| Signal to Noise Ratio | 110dB (A-weighted) |
| EIN | -129dBu (A-weighted) |
Lists key features of the DMP3, including dual channels, gain ranges, filters, and phantom power.
Details the function of each control and indicator on the DMP3's front panel.
Describes the rear panel connections, including power, outputs, and input jacks.
Guides users on adjusting gain levels for optimal signal input and output.
Explains the function and calibration of VU meters for visual output level reference.
Details the two gain ranges (Hi/Lo) and how to select them for different input signals.
Explains how to use the low-cut filter to reduce unwanted low-frequency sounds.
Describes the phase inversion feature for correcting out-of-phase signals.
Details the phantom power feature necessary for condenser microphones and its safe application.
Explains the difference between balanced and unbalanced audio outputs and their respective connectors.
Loading...