Need help?Do you have a question about the M-Audio KEYRIG 25 and is the answer not in the manual?
General| Number of Keys | 25 |
|---|---|
| Connectivity | USB |
| Type | MIDI Controller |
| Velocity Sensitivity | Yes |
| Pitch Bend | Yes |
| Modulation Wheel | Yes |
| Power Source | USB |
| Included Software | AIR Music Tech |
| Power | USB bus-powered |
| Compatibility | Windows and Mac |
Lists all items included in the M-Audio KeyRig 25 bundle package.
Details the key features and capabilities of the KeyRig 25 MIDI controller.
Specifies the minimum hardware and OS requirements for the KeyRig 25 keyboard.
Lists the minimum system requirements for the included Key Rig virtual instrument software.
Provides optional, detailed installation steps for Windows XP users, including driver installation.
Describes the functions of all controls and indicators located on the top surface of the KeyRig 25.
Details the various ports and connections available on the rear panel of the KeyRig 25.
Explains how to configure your music software to recognize and use the KeyRig 25.
Guides users on mapping KeyRig 25's buttons, knobs, and sliders to control software parameters.
Instructions for sending MIDI Program Change and Bank Change messages from the keyboard.
Explains how to set the default MIDI channel for all transmissions from the KeyRig 25.
Describes how to configure the MIDI Output port to function independently via USB.
Covers how to recall, store, and manage the five programmable presets on the KeyRig 25.
Details duplicating presets, using Enigma software, and sending Snap Shots.
Explains the function of temporarily muting faders and knobs to avoid value jumps.
Introduces the two modes of operation (Program and Performance) and navigating parameters.
Steps for assigning MIDI Continuous Controller (CC) numbers and MIDI channels to controls.
How to set minimum and maximum value limits for MIDI controls.
Configuring controls to step through MIDI values or program changes.
Setting buttons for toggle functions or assigning MIDI Machine Control commands.
Assigning MIDI Note On/Off messages and configuring RPN/NRPN messages for faders/knobs.
Understanding SysEx messages, Device IDs, and assigning the device ID.
How to perform a memory dump to back up presets and load them later.
Detailed explanation of how program and bank change messages work in MIDI.
Addresses issues like sudden malfunctions, sustain pedal reversal, no sound, and power problems.
Solutions for incorrect preset recall and restoring factory default settings.
A chart detailing MIDI functions transmitted and received by the KeyRig 25.
Tables listing MIDI CC assignments for knobs, faders, buttons, and pedals.
A chart for converting hexadecimal values to decimal values.
Lists the General MIDI sound specifications and instrument categories.
A reference list of standard MIDI controller (CC) numbers and their functions.
Information on NRPN support for Roland GS and Yamaha XG systems.
Lists the types of reverb and chorus effects available in General MIDI.
Covers electrostatic discharge, RF interference, and general device operation advice.
Details FCC compliance statements and lists product trademarks.
Outlines the terms, conditions, and limitations of the M-Audio product warranty.
Instructions on how to register the product for full warranty coverage and updates.
Provides a critical warning regarding chemicals contained in the product.
To Next Page
