Keystation Pro 88 Advanced Guide
Contents:
1 Getting Started
2 Terminology
3 Performance Operations of the Keystation Pro 88
• Sending Program Changes During Performance
• Sending Bank Changes During Performance
• Sending Snap Shot
• Muting All Controllers
• Drawbar Mode
• Changing Zones
4 Programming and Editing the Keystation Pro 88
• Introduction to Programming Options
• Selecting a Controller for Editing
• Assigning MIDI CCs
• Assigning an Individual MIDI Channel
• Changing the Global Channel
• Setting Toggle Values for the Buttons
• RPN/NRPN, SysEx and Other Advanced Messages
• Assigning MMC Control to a Button
• Assigning RPN/NRPN to a Fader/Rotary Controller
• Assigning a Note to a Button
• About SysEx Messages and Device ID
• Non-Volatile Memory
• Memory Dump
• Assigning Device ID
• Resetting to the Factory Default Setting
• Save/Recall of Individual Groups of Controllers
• Programming Zones
• How to Transpose or Change the Octave of a Zone
• The Program, Bank LSB and Bank MSB of a Zone
• Setting the Channel of a Zone
• Group A Controllers
To Next Page
Need help?
General
