5 The Evolution Librarian Software
About the Evolution Librarian Software
The Evolution Librarian Software is a Windows PC librarian program developed for M-
Audio products. The program not only works with the Keystation Pro 88 keyboard, but is
also compatible with other M-Audio USB controllers in the Evolution series. The
Librarian allows you to exchange patches between Evolution products that are
supported by the Librarian, so you never have to create the same patch twice.
The librarian allows you to send and receive 10 patches, load and save memory banks,
view how individual patches have been programmed, and drag and drop patches in
order to create new combinations in the 10 memory locations.
Installing the Librarian Software
1. Insert the Keystation Pro 88 Installer CD-ROM in to your CD-ROM drive.
2. Click on “Librarian Installer.”
3. Follow the onscreen instructions through the installation process. Once the
installation is complete, you may launch the program. The following is a screenshot
of what you should see on your monitor.
Setting Up the Librarian Software
Before you start using the Librarian, check that the Keystation Pro 88 has been selected
as the input and output device.
1. Select “MIDI Setup” from the Options menu.
2. Ensure the USB driver for you Keystation Pro 88 is selected in the “Inputs”
column. If you are using native drivers this may be named “USB Audio Device.”
3. In the “Outputs” column, select the USB driver for you Keystation Pro 88. If you are
using native drivers this may be named “USB Audio Device.” You are now ready to
use the Librarian software with you Evolution keyboard.
To Next Page
Loading...
Need help?
General
