M-Audio MobilePre USB - Technical Specifications; Hardware Features; Analog Outputs; Driver Features

Technical Specifications
Hardware Features
Analog Inputs:
- Microphone & Instrument/Line: 2, In-to-USB &
USB-to-Analog Audio Stereo Out
- XLR Microphone: 2, Balanced w/ switchable Phantom Power (+48 V)
- 1/8" Microphone: Stereo
- Instrument/Line: 2, 1/4" Balanced, high-impedance
(for electric guitar & bass)
- Input Channel Gain Knob: +40 dB max
- Input Channel LEDs: Clip (Red) and Signal-Present (Green)
Analog Outputs:
- Unbalanced Outs: 2, 1/4” (-10 dBV nominal, +1.7 dBV max)
- Stereo Line Out: 1/8” Mini (-10 dBV nominal, +1.7 dBV max)
- Headphone Out: 1/8” Stereo Mini with Level Control knob
Power: USB (no transformer or batteries required)
Driver Features
Bit-Depth Supported: 16-bit, Input & Output
Hardware Direct Monitoring: Zero Latency w/ Software Level Control
(Stereo or Channel 1 Mono path, Software-set)
Record & Play Outputs and Direct Monitor (Thru) Levels:
Software-controlled (Mute & +12 to -50 dB, in 2 dB steps)
Master Output Volume Control:
Software-controlled (Mute & 0 to -62 dB, in 2 dB steps)
27