Need help?Do you have a question about the M-Audio Oxygen 88 and is the answer not in the manual?
General| Number of Keys | 88 |
|---|---|
| Velocity Sensitivity | Yes |
| Aftertouch | Yes |
| MIDI I/O | USB |
| Other Controllers | Pitchbend, Mod Wheel |
| Control Elements | Knobs, Faders |
| Power | USB bus-powered |
| Software Included | Ableton Live Lite |
| Type | MIDI Keyboard Controller |
Step-by-step guide for installing Oxygen 88 drivers on Windows operating systems.
Guide for installing and configuring the Oxygen 88 on Mac OS X systems.
Explains how to configure music software (DAWs) to receive MIDI data from the Oxygen 88.
Steps for installing the DirectLink software for DAW integration.
Instructions for configuring DAW software to work with DirectLink.
Explains the function of DirectLink in automatically mapping controls.
Describes the controls located on the top panel of the Oxygen 88 keyboard.
Explains the function and assignability of the Modulation Wheel.
Details the function and assignability of the Pitch Bend Wheel.
Describes the function of the Octave and Transpose buttons for pitch shifting.
Explains the function of the Track buttons for DAW track selection.
Describes the 3-digit LED screen and its informational purpose.
Details the functionality of the five programmable Function buttons.
Explains how to access extended parameters and modes.
Describes the Mute function for preventing MIDI data transmission from knobs/sliders.
Explains the Snapshot function for simultaneous parameter adjustments.
Describes how the Select button functions with +/- buttons for different modes.
Details the function and operation of the nine Sliders on the Oxygen 88.
Explains the function of the nine Slider Buttons for track control and muting/soloing.
Describes the Zone feature for splitting the keyboard and assigning MIDI channels.
Explains the function of the six Transport buttons for DAW playback control.
Details the function and operation of the eight MIDI Control Knobs.
Explains the role of the velocity-sensitive keyboard in performance and programming.
Describes the function of the power On/Off switch.
Details the power socket specifications and usage.
Explains the sustain pedal input and its polarity setting.
Describes the expression pedal input for adding expressive changes.
Explains the MIDI Out port for transmitting MIDI data to external devices.
Details the USB port for power and MIDI data transmission.
Explains how to exit advanced mode or discard changes.
Details how to select controls for editing within advanced functions.
Explains how to assign controls and set data values for MIDI messages.
Describes how to assign controls to specific MIDI channels.
Explains how to set the default MIDI channel for the keyboard.
Details how to send Program Change MIDI messages.
Explains how to send Bank LSB messages for sound patch selection.
Explains how to send Bank MSB messages for sound patch selection.
Describes the Panic function to stop all notes.
Details how to adjust the keyboard's touch sensitivity.
Explains how to reverse slider operation for drawbar functionality.
Describes how to save and restore preset memory locations via SysEx.
Explains how to assign a unique Device ID for SysEx communication.
Details how to save control assignment settings to memory locations.
Describes the use of number keys in advanced mode.
Explains the function of the Enter key.
Details the Zone Voice function for bank/program change transmission.
Explains how to set Program Change numbers for each Zone.
Details how to set Bank LSB values for each Zone.
Explains how to set Bank MSB values for each Zone.
Describes how to set the note range for each keyboard Zone.
Explains how to assign MIDI channels to each Zone.
Details how to shift the octave pitch for each Zone.
Explains how to shift the pitch (semitones) for each Zone.
How to configure buttons/pedals to send two values when pressed/released.
How to set buttons/pedals to trigger values when held and release values when released.
How to assign buttons to send MMC (MIDI Machine Control) commands.
How to configure a button to send MIDI Note On/Off messages.
How to send combined MIDI messages for patch selection.
How to program buttons to increase or decrease MIDI CC values.
How to program buttons to increment/decrement Program Change numbers.
How to reverse the operational direction of knobs and sliders.
How to set a limited operational range for knobs and sliders.
How to assign RPN/NRPN messages to controls.
Explains System Exclusive (SysEx) messages and Device ID.
Provides an overview of Registered and Non-Registered Parameter Numbers (RPN/NRPN).
Advises checking external documentation for RPN/NRPN lists.
Explains RPN/NRPN resolution using coarse and fine messages.
Explains the use of a third MIDI CC for altering RPN/NRPN values.
Discusses SysEx messages, Device ID, and non-volatile memory.
Explains how preset patches are saved automatically.
Instructions on how to reset the Oxygen 88 to its factory default settings.
Lists standard MIDI CC numbers and their functions.
Lists assignable MIDI CCs for sliders and knobs with data ranges.
Lists assignable MIDI CCs for buttons and pedals with data parameters.
Lists MIDI note numbers across different octaves.
Details DirectLink transport control assignments for Pro Tools users.
Lists General MIDI reverb and chorus type numbers.
Details FCC and other regulatory compliance statements.
Provides information on the proper disposal of the product in the EU.
Lists important safety precautions for using the Oxygen 88.
Provides critical safety instructions for operating electronic equipment.
To Next Page
