M-Audio ProFire Lightbridge - Slaving to Word Clock BNC Input

ProFire Lightbridge User Guide
|
17
Scenario 4: ProFire Lightbridge Slaved to Word Clock BNC Input
In many larger digital setups, a master word clock generator is employed to provide an accurate timing reference to
the entire setup. In this case, ProFire Lightbridge can be slaved to the word clock generator’s BNC output, with other
devices configured as slaves and receiving their word clock distribution via ProFire Lightbridge.
In Figure 4 below, ProFire Lightbridge is slaved to a master clock generator, with additional devices slaved to the
same master clock through ProFire Lightbridge.
Slave
Slave Slave Slave
Word Clock
(BNC)
S/PDIF
(RCA)
Master
Figure 4 – ProFire Lightbridge slaved to master clock, providing clock distribution
For more information on selecting the word clock synchronization source, see the Software Control Panel section
of this manual.