5
ProjectMix Control Guide
Changing MIDI Assignments
To change the assignments to a control, simply click on it with your mouse. A small dialog box will appear containing the relevant parameters
for the control.
Simply type in your desired values and press OK. This will lock in your new settings for the control. Continue clicking on controls and
reprogramming them until you’ve made all the necessary changes.
Uploading Changes
While performing the reprogramming detailed above, your settings are being saved on your computer only. Once you have finished editing the
controls, you will need to upload these new settings to the ProjectMix I/O in order for them to take effect.
Click on the OPTIONS menu in the upper-left corner of the screen. Click on the first option, “Send Current Configuration to Control Surface,” to
begin the upload.
Once the upload completes, your changes will now be available when you engage MIDI mode on the ProjectMix I/O.
To Next Page
Loading...
Need help?
General
