Need help?Do you have a question about the M-Audio Torq Xponent and is the answer not in the manual?
General| Type | DJ Controller |
|---|---|
| Number of Channels | 2 |
| MIDI Control | Yes |
| Software Included | Torq LE |
| EQ | 3-band EQ per channel |
| Connectivity | USB |
| Microphone Input | 1 x 1/4" |
| Crossfader | Yes |
| Built-in Sound Card | Yes |
| Inputs | RCA, 1/4" |
| Outputs | RCA, 1/4" |
| Software Compatibility | Torq |
| Jog Wheels | 2 |
| Headphone Output | 1/4" |
| Audio Outputs | RCA, 1/4" |
| Audio Interface | Yes, 24-bit/48kHz |
Details the operating system requirements for Windows and Macintosh.
Specifies the minimum hardware specifications for Windows and Macintosh.
RCA outputs for connecting to speakers in a separate DJ booth.
RCA outputs for connecting to the main sound system.
1/4" inputs for foot switches and expression pedals.
5-pin MIDI port for transmitting MIDI data to external devices.
5-pin MIDI port for receiving MIDI data from external devices.
Provides audio and MIDI communication with the computer.
Turns the Xponent unit on and off.
Connects the supplied 12VDC power adapter.
For securing the device with a Kensington security cable.
Describes X-axis and Y-axis control for the Delay effect parameters.
Describes X-axis and Y-axis control for the Reverb effect parameters.
Describes X-axis and Y-axis control for the Flanger effect parameters.
Describes X-axis and Y-axis control for the Phaser effect parameters.
To Next Page
