12/56 Safety instructions
Bosch Rexroth AG, A22VG Series 40, RE 93221-01-B/07.2013
CAUTION
High noise development in operation!
Danger of hearing damage, deafness!
The noise emission of axial piston units depends on speed, operating pressure and
installation conditions. The sound pressure level may rise above 70 dB(A) during
normal application conditions.
▶ Always wear hearing protection when in the vicinity of the operating axial piston
unit.
Hot surfaces on the axial piston unit!
Risk of burns!
▶ Allow the axial piston unit to cool down sufficiently before touching it.
▶ Wear heat-resistant protection clothing, e.g. gloves.
Improper routing of cables and lines!
Tripping danger and damage to equipment!
▶ Lay cables and lines so that they can not be damaged and nobody can trip over
them.
Contact with hydraulic fluid!
Hazard to health/health impairment e.g. eye injuries, skin damage, toxication during
inhalation!
▶ Avoid contact with hydraulic fluids.
▶ When working with hydraulic fluids, strictly observe the safety instructions
provided by the lubricant manufacturer.
▶ Use your personal protection equipment (e.g. safety glasses, safety gloves,
suitable working clothes, safety shoes).
▶ If hydraulic fluid should, nevertheless, come into contact with your eyes or
bloodstream or is swallowed, consult a doctor immediately.
Escaping hydraulic fluid due to machine/system leakage!
Risk of burns and risk of injury due to escaping oil jet!
▶ Depressurize the machine/system and repair the leak.
▶ Never attempt to block or seal the leak or oil jet with a cloth.
2.7 Personal protection equipment
The personal protection equipment is the responsibility of the user of the axial
piston unit. Observe the safety regulations and provisions of your country.
All components of the personal protection equipment must be intact.
To Next Page
Loading...