M.E.Y. Equipment ALROH EDGER User Manual

Edger Blades
The Alroh edger cuts the grass with a clean knife like action. Adjust-
ment of the blade depth can give a perfect finish without overloading
the engine.
Reversing the blade can extend the blade life and ensure a good clean
finish. The cutting tip speed of the blade reduces as the blade wears
shorter and early replacement ensures the optimum performance.
Wire blade assemblies are available for edging soft paving or easily
damaged edges.
Operation
To follow lawn contours or around obstacles, raise the edger handle
slightly so as to run only on the front wheels. Move forward at a
speed that gives you the best finish.
Service Record
Your Local Alroh Dealer
Date Purchased First Service
1st Year Service 2nd Year Service
3rd Year Service 4th Year Service
5th Year Service 6th Year Service
Model Number Serial Number
RESIDENTIAL LAWN EDGER
OWNER’S MANUAL
Manufactured by M.E.Y. Equipment
200 Collier Road, Bayswater WA 6053
Tel 08 9370 1110 Fax 08 9370 2566
www.alroh.com.au Established 1951

M.E.Y. Equipment ALROH EDGER Specifications

General

Model	ALROH EDGER
Category	Edger
Manufacturer	M.E.Y. Equipment
Blade Size	9 inches
Engine Type	4-stroke OHV

Summary

Edger Blades

Operation

Instructions on how to maneuver the edger for lawn contours and obstacles, emphasizing forward speed.

Controls and Benefits

Maintenance

Guidance on cleaning, avoiding water ingress into bearings, and proper storage to prevent engine damage.

Starting Procedure

Steps for starting the edger, including fuel/oil checks, switch positions, choke usage, and throttle setting.

Stopping Procedure

Methods for stopping the engine, including the stop switch, choke, or spark plug lead removal.