Mechanical Combination Lock
M-LOCKS BV Tel: +31 (0)314 376 876
Vlijtstraat 40 ver. 1.2 2017 12 11 Fax: +31 (0)314 376 878
NL-7005 BN Doetinchem 4 www.m-locks.com
DATA
What if …
…accidentally the cam got moved before installation?
As long as the code has not been changed with the change key, the lock can be prepared for
mounting following the steps below:
1. Hold the lock so that you look at the cover and the bolt is to the right.
2. Turn the cam clockwise minimum 4 complete turns and stop when the cam is lined up as
shown in figure 1.
• Turn cam counterclockwise until lock opens. The cam should be lined up with the “LOCK
OPEN” line on the cover (see figure 2).
To Previous Page
Loading...
