M Tops MS100 - Cleaning and Storage; Troubleshooting; Specifications

7. Cleaning and store
3) Cleaning: wipe housing surfaces clean with a damp cloth (add some sort of mild liquid soap).
4)Wipe again with dry cloth
5)We recommend to store the item and its components in its original box, or a similar container that offers
adequate protection against damage in transit. Tape the box securely.
8. Trouble shooting
1) Cause of trouble
- Corrosion caused by inflow of fluid into the unit inside.
- Damages occurred by overheat when user covers the top plate with aluminium foil.
- Heavy laod
2) Power switch dim:
- Check power supply and power cord.
- Check power switch "ON".
- Check fuse.
In case of a malfunction as described above, contact your authorized Misung Dealer.
9. SPECIFICATIONS
Plate area
AC 230/220V 50/60㎐
DIMEN
SIONS
250V T1AH
250V T5AH
Fuse
Weight
Overall(WxDxH)
Power
HOT PLATE
HOT PLATE & STIRRER
MAGNETIC STIRRER
180 x 180mm
100 ~ 1500rpm
Up to 5000mL
Feed back control
-
-
-
-
H
E
A
T
E
R
Capacity
Temperature range
Control
Ceramic coated top plate
Up to 380℃
680W
Proportion control
-
-
Type
Top plate
M
O
T
O
R
Speed
Capacity
Control
Caution
2)Do not decompose,modify,revise or repair this product.This may be a cause or malfunction,electric or fire.
MS100(HP100)
MS200
MS300HS
1)Do not polish this product with substances such as alcohol or benzene.(Use neutral detergent.)
MODEL
Disconnect the plug before cleaning !!
!
www.mtops.co.kr misung@mtops.co.kr MISUNG SCIENTIFIC CO