Need help?Do you have a question about the M2TECH PALMER POWER STATION and is the answer not in the manual?
Power| supply voltage | 100-240VAC, 50-60Hz |
|---|---|
| power consumption | 2.5A peak, 60VA rated |
| output voltage | 15VDC (battery) |
| output current | 1A (peak, both outputs) |
| output noise | 15µVrms (20-20, 000Hz bandwidth) |
Battery| battery duration | min. 14 hours (@ 240mA output current) |
|---|---|
| battery charge time | 3.5 hours +/- 30 minutes |
| battery charge cycles | 1000 |
Operating Environment| operative temperature range | 0°C to 40°C |
|---|
Weight and Dimensions| size (cabinet) | 200x50x200mm (w x h x d) |
|---|---|
| size (with connectors and feet) | 200x55x210mm (w x h x d) |
| size (box) | 360x120x260mm (w x h x d) |
| weight (unit only) | 2.5kg |
| weight (box) | 3kg |
Controls the mains power input to the PALMER POWER STATION.
Enables or disables the power outputs for connected devices.
A red LED that glows when the mains switch is activated.
A red LED that glows when the battery is actively charging.
Connectors for supplying power to external M2TECH devices.
Houses fuses for the unit's electrical protection.
The connection point for the AC power cord.
Details the automatic activation of battery charging cycles.
Allows users to manually control battery charging during use.
Information on protecting the Li-Po battery and maximizing its lifespan.
Recommendations for positioning the unit for optimal ventilation.
To Next Page