PALMER POWER STATION
LOW NOISE BATTERY POWER SUPPLY/CHARGER
REVISION P
r
A – NOVEMBER 2011
Copyright © 2011, M2Tech Srl
8
M2Tech
www.m2tech.biz
4. Connections
Connect the female plug of power cord to the mains socket (Page 7, no.7) of PALMER
POWER STATION.
Connect the Bulgin plug of the supply cable to one of the PALMER POWER STATION output
connectors (Page 7, no.5).
Connect the 5.5/2.1mm plug of the supply cable to a 15V-operated M2Tech device. Of
course, two cables may be used when two devices need supply; otherwise the other
output will be unused.
Connect the plug of the power cord to a wall outlet.
To Next Page
Loading...