37
2. Place back part of the NFC device toward back part of M3 SM15.
3. Touch the screen. Data transfer would then start.
Caution when sharing data
While sharing data, the distance between devices should be less than 5 cm.
Caution when transferring data
When transferring data between devices, they do not need to be close. It is
recommended to keep the distance between devices within 10 m.
Connecting to the NFC Chip / Tag Card
1. Hold M3 SM15 as shown below. Do not cover the antenna area of a battery cover with
your hands.
2. Place M3 SM15 near NFC chip or tag card until data transfer is completed. (Generally,
data is displayed in the application.)
To Next Page
Loading...
Need help?
General
