© 2022 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-30 - support@malighting.com - www.malighting.com
1. Executors on screen – screen 9 displays executors 16 to 30.
2. Master Section – is displayed on the right of the screen 9.
Screen 10 (Left Letterbox Executor Screen)
Screen 10 or left letterbox executor screen is located below screen 3 and functions as its extension.
Screen layout of screen 10
1. Executors on screen – screen 10 displays executors 1 to 15.
2. Time Control – controls Program Time and Exec Time.
Important:
On a grandMA3 full-size it is also possible to operate the Time Control in Mode2 using the Custom
Section.
Requirement:
grandMA3 full-size
Program Time:
1. To operate the on-screen fader of the Program Time, move Wheel 1.
2. To activate Manual X-Fade, press Wheel 1 Upper Button.
3. To activate Set Time, press Wheel 1 Lower Button.
Exec Time:
1. To operate the on-screen fader of the Exec Time, move Wheel 2.
2. To activate Manual X-Fade, press Wheel 2 Upper Button
3. To activate Set Time, press Wheel 2 Lower Button.
For more information on the Custom Section see Device Overview in the grandMA3 manual.
To Next Page
Loading...