MA grandMA3 mode2 - Page 25

© 2022 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-30 - support@malighting.com - www.malighting.com
1
Release the rotary knob at the following screen:
Press the rotary knob to confirm.
The xPort Node reboots into grandMA3 mode.
For more information about changing from grandMA3 mode to Mode2, read the topic Control other MA devices
in the grandMA3 User Manual.
25 of 26
grandMA2 User Manual - Change Modes
Version 3.9 – 2022-05-10
English