Maasdam Pow’R-Pull User Manual

This manual contains IMPORTANT INFORMATION
about your MAASDAM PULLER.
T
able of Contents
How to Operate a Pow’R-Pull, Strap Pull’R ...................2
How to Operate a Long Haul Rope Puller ......................4
Lubrication and Inspection............................................6
Parts and Accessories...................................................6
Safety Instructions........................................................7
Lifetime Warranty .........................................................8
LIFETIME
WARRANTY
OPERATIONS
and SAFETY
MANUAL
SPECIAL SAFETY FEATURES:
1. Hook starts to open when device exceeds weight limit.
2. Latch “Pops” when weight is exceeded. At this point
remove the load from unit.
3. Handle bends to side when unit is overloaded

Maasdam Pow’R-Pull Specifications

General

Brand	Maasdam
Model	Pow’R-Pull
Category	Power Tool
Language	English

Summary

How to Operate a POW'R-PULL/STRAP PULL'R

Step 1: Unreeling Cable or Strap

Detailed instructions for unreeling cable or strap before use, ensuring safety and proper setup.

Step 2: Lifting or Pulling a Load

Procedures for lifting or pulling a load with the puller, emphasizing safe operation.

Step 3: Lowering or Releasing a Load

Instructions for safely lowering or releasing a load, including critical precautions.

Step 4: Rewinding Cable or Strap

Steps for rewinding cable or strap after use, with safety warnings.

How to Operate a Long Haul Rope Puller

Step 1: Installing the Rope

Guide for installing rope onto the rope puller unit, specifying rope type and procedure.

Step 2: Positioning a Puller

Instructions on how to position the rope puller before operation, ensuring secure attachment.

Step 3: Lifting or Pulling a Load

Procedures for lifting or pulling a load with the rope puller, emphasizing safety.

Step 4: Lowering or Releasing a Load

Steps for safely lowering or releasing a load, including critical precautions.

Maintenance and Safety Guidelines

LUBRICATION

Guidance on lubricating the puller for proper function and safety.

Visual Inspection

Pre-operation checks for damage, wear, and interference with moving parts.

Written Inspections

Schedule for third-party inspections with recorded results for continuing evaluation.

Additional Considerations

Key safety points and operational best practices for using Maasdam products.

Three Types of Pullers