IF AC IS BLOCKED BY STORM WINDOW
Add wood as shown in FIG.1,or remove storm window before air conditioner is installed.
If Storm Window Frame must remain,be sure the drain holes or slots are not caulked or painted
shut.A ccumulated Rain Wateror Condensation must be allowed to drainout.
Removing AC From Window
*
Turn AC off , and disconnect powercord.
*
Remove sash seal from between windows,and unscrew sash lock.
*
Remove screws installed through frame and frame lock.
*
Close (slide) side panels into frame.
*
Keeping a firm grip on air conditioner , raise sash and carefully “ rock ” air conditioner backward
to drain any condensate water in base of unit . Be careful not to spill any remaining water while
lifting unit from window.Store parts WITH air conditioner.
SASH
STORM WINDOW
FRAME
OR OTHER
OBSTRUCTION
BOARD
THICKNESS
AS REQUIRED,
FOR PROPER
PITCH TO
REAR, ALONG
ENTIRE SILL.
FASTEN WITH
NAILS OR
SCREWS.
FIG. 1
1 1/2” MIN
(38 mm)
3
To Next Page
Loading...
