To Next PageTo Next Page
Need help?Do you have a question about the mabe MMI12CABWCA6M8 and is the answer not in the manual?
General| Brand | mabe |
|---|---|
| Model | MMI12CABWCA6M8 |
| Category | Air Conditioner |
| Language | English |
Covers critical safety guidelines for using the air conditioner, including electrical safety and appliance handling.
Outlines restrictions on who can use the appliance and conditions that void normal operation warranty.
Details the layout and function of the remote control buttons and display indicators.
Explains how to start the unit, set temperature, and adjust fan speed using the remote.
Describes the functionality of different operating modes like AUTO, COOL, DRY, HEAT, and FAN.
Provides instructions for operating the unit in emergency or test modes when the remote is unavailable.
Guides on adjusting the vertical and horizontal louvers for optimal air flow direction.
Details how the SLEEP function adjusts temperature settings for comfortable sleep.
Explains the HEALTHY AIRFLOW function and how to set its louver positions.
Details setting ON/OFF timers and activating the TURBO function for rapid cooling/heating.
Step-by-step guide on how to open the remote, insert batteries, and close it.
Provides general tips for efficient maintenance, including managing doors, windows, timers, and power.
Instructions on how to clean the remote control using a dry cloth, avoiding water or chemicals.
Guides on cleaning the indoor unit body with a soft cloth and mild detergent for stains.
Step-by-step instructions for opening the grille, removing, cleaning, and reattaching the air filter.
Instructions for replacing the optional air purifying filter with the standard air filter.
Critical warnings about installation, emphasizing professional help to prevent electric shock, fire, or water leaks.
Immediate actions to take if an abnormality like a burnt smell is detected, including stopping operation.
Safety guidelines for electrical connections, including avoiding extension cords and ensuring proper grounding.
General cautions regarding unit placement, operation with wet hands, cleaning, and avoiding objects on the unit.
Explains restart delays, common noises, and their causes.
Addresses odor, mist emission in modes, and fan speed limitations in DRY mode.
Troubleshooting steps for when the unit won't start or experiences poor cooling performance.
Specifies the applicable ambient temperature ranges for cooling and heating operations.
Guidance on replacing a damaged supply cord or a blown fuse on the PC board.
Covers installation standards, wiring methods, battery disposal, child supervision, and support requirements.
Lists the necessary tools required for the installation process of the air conditioner.
Details the requirements for the power source, including dedicated circuits and proper receptacle installation.
Provides guidelines for selecting optimal installation locations for both indoor and outdoor units.
Illustrates unit placement, piping directions, and required clearances for installation.
Lists and describes the optional parts used for piping during installation.
Details the list of included accessories with their respective quantities for the air conditioner.
Provides dimensions for fixing the outdoor unit to the floor for various BTU systems.
Specifies the required pipe diameters for liquid and gas lines based on BTU system capacity.
Guides on fitting the mounting plate and determining the wall hole location for indoor unit installation.
Instructions for creating the wall hole and fitting the piping hole cover securely.
Details on routing pipes and the drain hose for rear and left-side piping installations.
Step-by-step instructions for securely hanging and fixing the indoor unit body onto the mounting plate.
Guidance on safely unloading the indoor unit body from its packaging.
Detailed steps for connecting the electric cables between the indoor and outdoor units.
Emphasizes the importance of confirming terminal numbers for correct wiring to ensure proper operation.
Instructions for connecting pipes, including bending radius and connecting the gas side first.
Provides a table correlating pipe diameters with recommended fastening torques.
Precautions for pipe installation, including preventing debris entry and guidelines for refrigerant charging.
Details on connecting plugs to the terminal block and inserting cables according to terminal numbers.
Guidance on attaching a drain elbow to the unit, specifically for heat pump units.
Step-by-step instructions for using a vacuum pump to purge the refrigerant system.
Procedures for handling refrigerant leaks, including discharging, vacuuming, and recharging.
Safety warnings regarding the refrigerant system, emphasizing correct refrigerant type and pressure.
Guidelines for the power source, emphasizing exclusive use for the air conditioner and circuit breakers.
Instructions for cutting pipes, removing burs, and performing correct flaring for connections.
Guidelines for installing the drain hose with a downward slope and avoiding incorrect drainage setups.
Steps to confirm proper drainage and requirements for heat insulation of the drain hose.
Details on the refrigerant charge label, including its purpose and information to be filled.
Checklist items for ensuring proper installation, including leak checks, wiring, drainage, and voltage.
Checks to perform during test run, verifying noise levels, indicator lights, and operational performance.
Provides detailed electrical specifications for various MMI series models, including voltage, power, and refrigerant.
Details electrical specifications for MMT series models, covering voltage, power consumption, and capacity.
Lists electrical specifications for MMI-MC series models, including capacity, protection ratings, and refrigerant charge.
Outlines the warranty coverage, duration, and terms applicable to products sold in Mexico.
Lists the specific product models covered under the warranty policy.
Specifies conditions and situations that are excluded from warranty coverage.
Details the warranty certificate and conditions applicable exclusively to Argentina.
Outlines the responsibilities of the original buyer to ensure warranty validity.
Fields for recording the product's identification details by the seller.
Covers general warranty terms, recommendations for use, and country-specific validity.
Details warranty exclusions specific to Colombia, including operational and environmental factors.
Section for filling out product identification data by the distributor.
Explains what constitutes covered defects in manufacturing and functioning under the warranty.
Describes the procedure for consumers to make the warranty effective by presenting proof of purchase.
