To Next PageTo Next Page
Need help?Do you have a question about the mabe MMI12CABWCAAXM8 and is the answer not in the manual?
General| Type | Air conditioner indoor unit |
|---|---|
| Inverter technology | Yes |
| Indoor unit depth | 545 mm |
| Indoor unit width | 720 mm |
| Indoor unit height | 255 mm |
| Indoor unit weight | 25500 g |
| Indoor unit package depth | 620 mm |
| Indoor unit package width | 850 mm |
| Indoor unit package height | 370 mm |
| Indoor unit package weight | 29500 g |
Explains operating limits and potential anomalies for normal unit function.
Details about frost formation and defrosting during heating operation.
Instructions for operating the unit without a remote controller.
Guidance on adjusting airflow direction using the remote or manually.
Instructions for installing batteries in the remote control.
How to use the automatic mode of the air conditioner.
Guide to using cooling and heating modes.
Instructions for operating the air conditioner in fan mode.
Steps for using the drying operation mode.
Instructions for cleaning the indoor unit's front panel.
Steps for removing and cleaning the air filter.
Guide on reinstalling the air filter after cleaning.
Pre-operation checks for the air conditioner.
Post-operation maintenance tasks.
Guidelines for selecting a suitable location for installation.
Specifications for the mounting structure of the outdoor unit.
Essential electrical safety measures for installation.
Instructions for ensuring proper grounding of the unit.
Details on power cable, fuse, and switch selection.
Steps for mounting the indoor unit bracket securely to the wall.
How to create and prepare the wall opening for piping.
Guidance on routing the connection pipes and drain hose.
Instructions for connecting the drain pipe and tightening nuts.
How to insulate and secure the piping and cables.
Steps for hanging and securing the indoor unit onto the mounting plate.
Diagram showing clearance requirements for outdoor unit installation.
Table of dimensions for outdoor unit mounting bolts.
Instructions for connecting the outdoor unit to the refrigerant lines.
Steps for connecting the electrical wiring to the outdoor unit.
Diagrams illustrating wiring configurations for different speeds.
Procedure for removing air from the refrigerant system.
Detailed steps for vacuum pumping the refrigerant lines.
Installation of the drain system for outdoor condensation.
Checklist for verifying electrical and installation safety.
Preparation and method for testing the unit's operation.
Details warranty coverage, exclusions, and conditions.
Form for recording product details for warranty purposes.
Details warranty terms, conditions, and exclusions for Chile.
Lists conditions that will void the warranty.
Defines what manufacturing defects are covered by the warranty.
Specifies circumstances that automatically cancel the warranty.
