To Next PageTo Next PageWhy does my mabe MMT12CABWCAM8 make so much noise?
Your mabe air conditioner may produce different types of noise during operation. A swishing noise is normal during operation or when the unit stops. A cracking noise can occur due to the case expanding or shrinking with temperature changes. If there is a big noise from air flow, the air filter may be too dirty.
Why does my mabe Air Conditioner smell bad?
A bad odor from your mabe air conditioner usually means the system is circulating odors from the indoor air, such as those from furniture, paint, or cigarettes.
Why is my mabe Air Conditioner not cooling properly?
Several factors can cause poor cooling in your mabe air conditioner. Check if the air filter is dirty and clean it if necessary (normally every 15 days). Ensure there are no obstructions blocking the air inlets and outlets. Verify that the temperature is set correctly and that all doors and windows are closed. Direct sunlight through the window, excessive heat sources, or too many people in the room can also affect cooling performance; use curtains to block sunlight.
What to do if my mabe MMT12CABWCAM8 unit won't start?
If your mabe air conditioner won't start, first ensure that the power plug is properly inserted. Then, check if there is a power failure in your area. Finally, inspect the fuse to see if it has blown out.
Why is my mabe Air Conditioner blowing out mist or steam?
During COOL or DRY operation, your mabe air conditioner may blow out mist because of the sudden cooling of indoor air.
Why can't I change the fan speed in dry mode on my mabe Air Conditioner?
In DRY mode, when the room temperature is lower than the temperature setting +2 °C, the mabe air conditioner will run intermittently at LOW speed regardless of the FAN setting.
General| Type | Air conditioner indoor unit |
|---|---|
| Air filter | Yes |
| Indoor unit depth | 204 mm |
| Indoor unit width | 855 mm |
| Indoor unit height | 280 mm |
| Indoor unit weight | 9500 g |
| Indoor unit package depth | 279 mm |
| Indoor unit package width | 954 mm |
| Indoor unit package height | 355 mm |
| Indoor unit package weight | 12000 g |
Detailed steps for purging the air conditioning system using a vacuum pump.
Overview of the remote control buttons and their basic functions.
Explanation of advanced functions and buttons on the remote control.
Detailed description of each operation mode (AUTO, COOL, DRY, HEAT, FAN) and their notes.
How to operate the unit when the remote control is defective or lost.
Procedure for performing a test operation, typically below 16°C room temperature.
How to set and cancel timer functions for the air conditioner.
Steps for removing, cleaning, and reattaching the air filter.
Troubleshooting why the system may not restart immediately and common operational noises.
Troubleshooting why the unit may not start or why cooling performance is poor.
Steps for securely hanging the indoor unit body onto the mounting plate.
