Mac allister M5MTP25-3 User Manual

26 cm
3
5 in 1
Multi Tool
Original Instructions – M5MTP25-3__V10322
WARNING: Read the instruction handbook thoroughly before
using the machine. First time operators should receive
practical use instructions of the machine and protective
equipment from an experienced operator.
M5MTP25-3
EAN: 5059340256054
BX220IM/B3

Mac allister M5MTP25-3 Specifications

General

Power	250 W
No Load Speed	12000 rpm
Cable Length	2 m
Sanding Action	Orbital
Power Source	Electric
Dust Extraction	Dust Extraction Facility

Summary

Safety Information

Safety Warnings and Precautions

General safety, fuel handling, training, and preparation warnings.

Personal Protective Equipment (PPE)

Required safety clothing and gear for safe operation of the machine.

Safe Operation Guidelines

Rules for safe machine operation, handling, and environmental safety.

Transport, Storage, and Emergency Procedures

Safely transport, store, and handle emergencies with the machine.

Symbols and Signal Words Explained

Understanding warning symbols and signal words used in the manual.

Technical Specifications

Engine and Attachment Specifications

Detailed technical data for the engine and various attachments like brush cutters.

Sound and Vibration Levels

Measured sound pressure and vibration levels according to relevant standards.

Product Overview and Components

Main Unit Identification

Diagram and list of the main components of the power unit.

Attachments and Accessories Identification

Diagrams and lists of hedge trimmer, pole pruner, and other attachments.

Getting Started: Preparation and Assembly

Unpacking and Initial Checks

Unpacking the machine and verifying all contents and parts.

Assembly Instructions

Step-by-step guide to assemble the machine and its various attachments.

Fuel and Oil Filling Procedure

Instructions on how to correctly mix and fill fuel and oil for the engine.

Operating Controls Explained

Identification and function of all the machine's operating controls.

Quick Start Guide

Starting and Stopping Procedures

Concise steps for starting, operating, and stopping the machine.

Storage Guidelines

Basic instructions for storing the machine after use.

Operation and Usage

Intended Use and Safety Equipment

Machine's purpose, safety guards, harness usage, and operator requirements.

Engine Starting and Stopping

Detailed steps for starting and stopping the engine under various conditions.

Using Attachments

How to operate brush cutter, grass trimmer, pole pruner, and hedge trimmer attachments.

After Use Procedures

Steps to follow after finishing operation, including cleaning.

Care and Maintenance

General Maintenance Principles and Cleaning

Golden rules, cleaning housing, attachments, and cutting devices.

Guide Bar, Saw Chain, and Blade Maintenance

Maintenance procedures for guide bars, saw chains, and brush cutting blades.

Air Filter, Fuel System, and Spark Plug Maintenance

Servicing air filter, fuel lines, spark plug, and carburetor.

Maintenance Schedule, Storage, and Transportation

Maintenance tables, storage tips, and transportation procedures.

Troubleshooting Common Issues

Engine Starting and Performance Problems

Solutions for engine not starting or not reaching maximum speed.

Cutting, Vibration, Noise, and Smoke Issues

Troubleshooting cutting performance, vibration, noise, and smoke problems.

Support and Compliance

Recycling, Guarantee, and Customer Support

Disposal, warranty, contact information, and spare parts availability.

Declarations of Conformity

Official statements of compliance with relevant UK and EU regulations.