EN
1) Warning! Danger. The failure to use this machi-
ne correctly can be hazardous for oneself and oth-
ers.
2) Read the instruction manual before using the
machine.
3) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise le-
vel of 85 dB (A) or higher. Wear ear protectors,
safety goggles and a protective helmet.
4) Wear gloves and protective footwear!
5) Danger of flying objects! Keep any people or
pets at least 15 m away when using the machine!
11) Fuel tank
12) Engine stop switch
positions
a = stop
b = run
c = start
13) Choke
14) Primer
6) Maximum cutting device speed. Only use sui-
table cutting devices.
7) Do not use the circular saw blade. Danger:
Using the circular saw blade with machines
marked with this symbol exposes the user to
the danger of very serious or even fatal in-
juries.
8) Warning! Petrol is flammable. Allow engine to
cool at least 2 minutes before refuelling.
9) Warning! Keep away from hot surfaces.
SYMBOLS 3
EXPLANATORY SYMBOLS
ON THE MACHINE (if present)
2. SYMBOLS
21) Cutting device
with adequate
protection
22) Cutting device
rotation direction
EXPLANATORY SYMBOLS
ON THE PROTECTION DEVICES (if present)
To Next Page
Loading...