What to do if my Mac allister MHT60060 does not start?
If your Mac allister Trimmer doesn't start, it could be due to a few reasons: * It might not be connected to a power supply. Ensure it is properly connected. * The power cord or plug could be defective, in which case you should have it checked by a specialist electrician. * There could be another electrical defect within the product, which also requires checking by a specialist electrician.
How to fix unsatisfactory cutting results with my Mac allister Trimmer?
If you're getting unsatisfactory cutting results with your Mac allister Trimmer, consider these points: * The blade might be worn or damaged. Replace it with a new one. * The branches you're trying to cut might be too thick for the trimmer's capacity. Only cut branches that comply with the specified capacity.
Why is my Mac allister MHT60060 not reaching full power?
Your Mac allister Trimmer might not be reaching full power due to several reasons: * The extension cord may not be suitable for operating the product. Try using a proper extension cord. * The power source, like a generator, might have too low voltage. Connect the trimmer to another power source. * The air vents could be blocked. Make sure to clean the air vents.
Why Mac allister Trimmer has excessive vibration or noise?
Excessive vibration or noise in your Mac allister Trimmer can be caused by: * A dull or damaged blade. Replace it with a new one. * Loose bolts or nuts. Tighten them to secure the trimmer.
General| Power type | Electric |
|---|---|
| Power output | 600 W |
| Corded/cordless | Corded |
| Cutting width | 30 cm |
| Weight | 3.2 kg |
| Telescopic shaft | Telescopic Shaft |
Essential safety warnings for operating the hedge trimmer, covering general, work area, and electrical precautions.
Identifies and illustrates all parts and accessories of the hedge trimmer for user familiarity.
Instructions for unpacking, necessary items, and initial setup before operating the hedge trimmer.
Explains the hedge trimmer's intended use, capabilities, and how to adjust the sweeper attachment.
Comprehensive guide on general operation, trimming techniques, and blade lubrication for optimal performance.
Covers after-use care, cleaning, product inspection, and specific maintenance for the cutting device.
Solutions for common problems, including starting issues, power loss, and unsatisfactory cutting results.
Guidelines for environmentally responsible disposal of the hedge trimmer and its packaging.
Information on the product's guarantee period, terms, conditions, and how to make a claim.
Detailed technical data, sound pressure/power levels, and hand-arm vibration values for the hedge trimmer.
Statement confirming the product's compliance with applicable European directives and safety standards.
To Next Page
