Need help?Do you have a question about the Mac allister MPS750S-2 and is the answer not in the manual?
General| Power | 750W |
|---|---|
| Bar length | 20 cm |
| Chain speed | 11 m/s |
| Telescopic shaft | Yes |
| Maximum reach | Up to 2.7 m |
| Voltage | 230-240V |
| Power Source | Electric |
| Maximum Cutting Diameter | 200 mm |
| Chain Pitch | 3/8" |
| Chain Gauge | 0.05 in |
| Oil Tank Capacity | 100 ml |
Important safety instructions to read and keep for future reference.
Precautions to prevent electric shock during operation and use.
Guidelines for user safety, including alertness and protective equipment.
Proper usage, maintenance, and care to ensure safe operation and longevity.
Specific safety instructions for operating the pole saw and preventing injuries.
Measures to minimize exposure to vibration and noise during product use.
Steps to follow in case of malfunctions or emergencies for user safety.
Potential risks that remain even when operating according to safety requirements.
Explanation of symbols and abbreviations used in the manual for hazard awareness.
Critical warnings related to electrical hazards and general dangers.
Identification of the product, including brand name and model.
Visual identification of all parts of the pole saw using a diagram.
A numbered list of all components included with the product.
Instructions for unpacking and a list of items required for assembly and operation.
Step-by-step guide for assembling the motor unit and connecting extensions.
Detailed procedure for correctly installing the saw chain and guide bar.
Verifying the automatic oiling system is delivering oil to the bar and chain.
Correct procedure for attaching and adjusting the safety harness.
Defines the product's purpose and limitations for safe and effective use.
Guide on how to adjust the pole extension to the required length.
Procedures for operating the on/off switch and lock-off button.
How to adjust the angle of the cutting head for different tasks.
Performing a safety test to ensure the saw chain stops immediately when switched off.
Basic checks and procedures for safe and effective general operation.
Methods and safety advice for pruning branches with the pole saw.
Detailed explanation of kickback and how to avoid it.
Techniques for cutting branches of different sizes and after-use procedures.
Instructions for cleaning the product, including air vents and general surfaces.
Procedures for maintaining the sprocket wheel and guide bar for optimal performance.
Information on available replacement parts and where to purchase them.
Safety instructions for replacing the power cord and plug.
Guidance on product repair and when to seek professional service.
Proper methods for storing the product to maintain its condition.
A guide to identify and resolve common product malfunctions.
Information on responsible product disposal and environmental considerations.
Details about the product's guarantee period and exclusions.
Overall technical details including voltage, power, and dimensions.
Specific technical data for the chain and guide bar.
Measured sound pressure, sound power, and hand-arm vibration levels.
Statement of the product's compliance with relevant directives and standards.
To Next Page