MAC Audio MAC 410

85
Note: Never use a pen or sharp object to calibrate the touch screen as this will damage the panel.
1. Touch the Calibrate Start icon and the rst screen will appear with instructions.
2. Follow the instructions on the screen touching and momentarily holding nger or a stylus to the
center of the target for 2 seconds. Repeat as the target moves to each corner of the screen
and nally to the center.
Calibration Screen
3. The second screen will appear:
Calibration Screen Conrmation
4. If the screen is touched, the new calibration parameters will be accepted. If the screen is not
touched within thirty seconds, the new parameters will be disregarded.
Illumination: Touch to access the Illumination screen. Touch a color to set the front panel display
to the selected color.
UI Color: Touch green, red, amber, blue or purple to select the user interface color. Touch again to
conrm and set the color.
Demo:
Touch ON or OFF to turn the demonstration mode ON or OFF. The factory default setting is OFF.
TFT Monitor Auto Open
• If “TFT Open” is “Auto on” when the unit is turned on, the monitor automatically moves to the
viewing position.
• If “TFT Open” is “Auto off” when the unit is turned on, press the OPEN button on the front panel
to move the monitor into the viewing position.
• If “TFT Open” is set to “Manual”, the TFT will not close when the key is turned off.
Rear View Camera: Press “Mirror” to turn on the mirror function, press “Normal” to turn off.