98
Track Direct Entry
When the Direct Entry icon is touched the Direct Entry Screen appears. The user can manually
select a track by touching the corresponding number. After entering the track numbers touch the
OK icon. If a wrong digit is entered touching the arrow will remove the number. After touching OK
playback will begin.
CD Track Direct Entry Screen
Controlling Playback
Inserting a Disc: Upon inserting a CD, disc play begins. You cannot insert a disc if there is
already a disc in the unit or if the power is off.
Ejecting a Disc: Press the Eject (
) button on the front of the unit to eject the disc. The unit
automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will
remain off after the disc is ejected.
Resetting the Loading Mechanism: If the disc loads abnormally or an abnormal core mechanism
operation occurs, press and hold the Eject (
) button on the front of the unit to reset the loading
mechanism. Normal operation resumes.
Pausing Playback: Touch the Play/Pause (
) icon to suspend or resume disc play.
Moving Through Tracks: Touch the Next (
) icon to advance to the next track on the disc.
Touch the Previous ( ) icon to move to the previous track.
Repeat Playback: Touch the
icon to alter repeat mode according to the following:
• CD-DA: Repeat Track > Repeat Album > Repeat Off
• CD-R/RW: Repeat Track > Repeat Album > Repeat Off
Random Play Select: Touch the Random (
) icon to play the tracks on the disc in a random,
shufed order. Touch the Random ( ) icon again to cancel Random Play mode.
Note: CD-R and CD-RW will not play unless the recording session is nalized.
To Next Page
Loading...
Need help?
General
