Need help?Do you have a question about the MAC Audio Z 4200 and is the answer not in the manual?
Step-by-step guide for power wiring and auto turn-on.
Recommendations for routing audio signal cables to prevent interference.
Instructions for connecting speakers to the amplifier channels.
How to adjust input sensitivity for optimal performance.
Using the low-pass filter for subwoofer frequency control.
Using the high-pass filter for satellite speakers.
Adjusting the bass boost for enhanced low frequencies.
Utilizing line-level outputs for connecting other amplifiers.
Information on the warranty start date and what is covered.
Conditions that void the warranty and how to get service.
Step-by-step guide for power wiring and auto turn-on.
Recommendations for routing audio signal cables to prevent interference.
Instructions for connecting speakers to the amplifier channels.
How to adjust input sensitivity for optimal performance.
Using the low-pass filter for subwoofer frequency control.
Using the high-pass filter for satellite speakers.
Adjusting the bass boost for enhanced low frequencies.
Utilizing line-level outputs for connecting other amplifiers.
Information on the warranty start date and what is covered.
Conditions that void the warranty and how to get service.
General| Frequency response | 10Hz - 30kHz |
|---|---|
| THD at 1 kHz | < 0.05 % |
| Signal to noise ratio | > 100 dB |
| Input sensitivity | 0.2V - 6V |
| Amplifier Class | AB |
| Power supply | 12 V |
To Next Page
