MAC TOOLS PDG90-01 - User Manual

PDG90
-01
1 Rev. 03/10/06
PDG90
-01
Right Angle
Pencil Die
Grinder
SPECIFICATIONS
Free Speed (RPM)
. . . . . . . . . . .
70,000
Collet Size (In.)
. . . . . . . . . . . . . . .
1/8"
Air Inlet (
NPT
)
. . . . . . . . . . . . . . . .
1/4"
Air Pressure (PSI)
. . . . . . . . . . . . . . .
90
Air Consumption (
CFM
)
. . . . . . . . .
1
Hose Size (I.D.)
. . . . . . . . . . . . .
5/16"
Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to
filter out microscopic particles.
Operating Instructions • Warning Information • Parts Break down
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
• MAXIMUM RPM OF 70,000
• MAX AIR PRESSURE:
90 PSIG, 6.2 BAR
• RPM OF THE ACCESSORY
MUST EXCEED TOOL RPM
PDG90-01_OpMan_031006.indd 1 3/13/06 10:22:46 AM

Summary

Safety Warnings and Health Precautions

Health Hazards from Dust Exposure

Details chemicals causing cancer and reproductive harm, and methods to reduce exposure.

General Safety Guidelines

Covers operating, maintenance, and personal protective equipment requirements for safe tool use.

Product Specifications

Technical Specifications

Lists key operational parameters like RPM, air pressure, and hose size for the die grinder.

Parts and Accessories

Parts Identification and List

Diagram and table identifying all components of the die grinder and their part numbers.

Available Accessories

Lists optional grinding stones and discs for various applications.

Operation, Air Supply, and Lubrication

Air Supply Requirements

Specifies recommended air pressure, hose diameter, and air quality for optimal tool performance.

Tool Operation Guide

Instructions on proper usage, force application, gripping, and avoiding hazardous conditions.

Lubrication Instructions

Details daily lubrication requirements for the air motor using air tool oil.

Warranty Information

Product Warranty Details

Outlines the warranty terms for defects in workmanship and material, including limitations.

MAC TOOLS PDG90-01 Specifications

General

Type	Die Grinder
Air Consumption	4 CFM
Hose Size	3/8 inch
Power Source	Pneumatic
Collet Size	1/4 inch
Air Inlet	1/4 inch NPT