MAC TOOLS STL500M - Operation and Safety Guidelines; Getting Started and Usage; Critical Safety Warnings; Customer Support and Contact

GETTING STARTED
•
To use, plug the unit into any 120V AC power source, such as a wall receptacle. Allow the unit to
fully charge until four LED's light up on the back of the light before use
•
Charge this light every month if not in constant use, and after each use when used often to insure
battery longevity
•
Press and hold the switch on the back of the unit to show battery capacity. Press the switch once for
low brightness, press switch twice for high brightness, press switch three times to turn light off
WARNINGS
•
Do not use in or around tubs, showers, sinks, pools, hot tubs
•
When charging, use only the recommended voltage and frequency requirements
•
Keep out of the reach of children
•
Do not operate light with wet hands
•
Keep lamp away from hot objects
•
Do not incinerate
•
Replace the battery with manufacturer and battery designation only
•
Do not crush
CUSTOMER SERVICE
We at Mac Tools are committed to our customers, please reference the following phone number for a direct
contact to one of our customer technicians. They will be more than happy to help with any service or war-
ranty questions you may have about your professional stick light.
Mac Tools
505 North Cleveland Avenue
Suite 200
Westerville, Ohio 43082
800.MACTOOLS
MACTOOLS.COM
800.MACTOOLS
5