MAC3 PresSystem - Initial Device Startup; Initial Startup Procedure

manual utilizare presostat electronic
pressystem
15
 Este recomandata montarea unei supape de
sens la absorbtia (intrare) pompei (vezi Figura
1).
 Este recomandata instalarea unui manometru
de citire a presiunii.
 Este recomandata conectarea PresSystem cu
teava prin racord olandez.
 Este recomandata instalarea unui robinet in
apropierea PresSystem in linie cu vasul de
expansiune.
 Vasul de expansiune, robinetul sau orice alt
consumator nu trebuie montat inaintea
PresSystem.
 It is recommended the insertion of a non-return
valve at the inlet (Figura 1).
 It is recommended to install a pressure gauge
reference.
 It is recommended to install the PresSystem
using a 3-piece union fittings.
 It is recommended to install a tap near the
PresSystem and in series with the expansion
tank