manual utilizare presostat electronic
pressystem
42
7 DEPANARE SI INTRETINERE - TROUBLESHOOTING AND MAINTENANCE
Daca o anumita eroare este prezenta in
instalatie, PresSystem este prevazut cu un LED
ERROR ce se aprinde si pe Display se afiseaza
codul erorii active.
(Numai pentru Versiunea Cosφ): Daca o anumita
eroare este prezenta, PresSystem va aprinde si
stinge intermitent toate LEDurile si pe Display va
aparea codul erorii active
Codurile de eroare sunt urmatoarele:
If a fault is present the PresSystem lights up the
LED ERROR and displays the error code of the
current fault.
(Version Cosφ only): If a fault is present the
PresSystem turns on and off all the LEDs, and
displays the error code of the fault.
Error codes:
Presiunea masurata este sub
pragul de activare al erorii Lipsa
Apa (LED DRY RUNNING).
PresSystem va incerca
repornirea automat:
I° tentativa dupa 1 secunda
II° tentativa dupa 15 secunde
III° tentativa dupa 15 minute
IV° tentativa dupa 1 ora
V° tentativa dupa 24 ore
La epuizarea primelor 5
incercari, se va efectua o
The measured pressure is below
the threshold pressure of dry
running (LED DRY RUNNING).
The PresSystem attempts the
restart in different periods of time.
In particular:
I° attempt after 1 second
II° attempt after 15 seconds
III° attempt after 15 minutes
IV° attempt after 1 hour
V° attempt after 24 hours
To Next Page
Loading...
