MacAllister COD2000FLS - Page 3

Contents
1
I - Parts list A/1
II - Technical data 1
III - Safety instructions 2
IV - Getting started 5
V - Operation 7
VI - Maintenance 9
VII - Guarantee 10
I - Parts list
II - Technical data
Voltage:............................... 230-240V~50Hz
Rated input:.....................................................
.....2000W S6 40% 4min load/6min no load
No load speed:.......................... n
0
2800min
-1
Blade size:......................Ø250 x Ø30 x3mm
Mitre saw mode
Max cut at 90º:..........................210 x 75mm
Max compound mitre cut at 45º x 45º:.........
....................................................150 x 50mm
Max mitre cut at 90º x 45º:.......150 x 75mm
Max bevel cut at 45º:................210 x 50mm
Table saw mode
Max cut at 90º:.....................................65mm
Max cut at 45º:.....................................45mm
Tilting range:.......................................... 0-45º
Weight:................................................. 53kg
NOISE AND VIBRATION DATA
A weighted sound pressure:........ 92.7dB(A)
A weighted sound power:...........105.7dB(A)
Typical weighted vibration:............3.227m/s
2
The sound intensity level for the operator
may exceed 85dB(A) and sound protection
measures are necessary.
1. Saw table
2. Bevel position locking lever
3. No Volts ON/OFF switch
4. Folding workstand
5. Rip fence guide channel
6. Mitre fence guide channel
7. T handle
8. Blade height adjustment knob
(Table saw mode)
9. Motor
10. Mitre saw handle
11. Rotating table
12. Mitre saw fence
13. Retractable blade guard
14. Mitre saw head locking knob
15. Push stick storage point
16. Locking knob
17. Push stick
18. Riving knife locking knob
19. Fixed guard
20. Guard locking lever
21. Blanking plug
22. Belt guard
23. Rotating table lock lever
24. Adjustable foot
25. Table insert
26. Top guard
27. Riving knife
28. Rip fence
29. Mitre gauge
ˇ˝
ˇ˝
ˇ˝
1
2
3