[1] Throttle control
The throttle is controlled by the lever (1).
Lever positions are indicated on the relevant plate.
Some models have a fixed speed with no need for a throttle.
[2] Blade brake lever
The blade brake is controlled by the lever (1) which must be held against the handle for
ignition and during lawnmower operations.
The engine stops when the lever is released.
[3] Drive engagement lever (only for Mod. MPRM 46SP)
On power-driven models, push the lever (1) toward the handle for forward movement.
The lawnmower stops moving forward when the lever is released.
[4] Cutting height adjustment
The cutting height is adjusted by the levers (1).
The four wheels must be adjusted to the same height.
DO THIS WHEN THE BLADE IS STOPPED.
Controls
1
[1]
1
[3]
1
[2]
[4]
1
1
Controls
7
GB
IE
Getting started...
MPRM 46HP / 46SP by MacAllister
To Next Page
Loading...
