7
MSCD18-Li-2
Safety information
Getting Started . . .
>
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
ush with water. If liquid contacts eyes, additionally seek
medical help.
Liquid ejected from the battery may cause
irritation or burns.
>
Do not use a battery pack or tool that is damaged or
modified.
Damaged or modified batteries may exhibit
unpredictable behaviour resulting in re, explosion or risk of
injury.
>Do not expose a battery pack or tool to re or excessive
temperature.
Exposure to re or temperature above 130 °C
may cause explosion.
>
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature range
specied in the instructions.
Charging improperly or at
temperatures outside the specied range may damage the
battery and increase the risk of re.
Service
>
Have your power tools serviced by a qualied repair
person using only identical replacement parts.
This will
ensure that safety of the power tool is maintained.
>
Never service damaged battery packs.
Service of battery
packs should only be performed by the manufacturer or
authorized service providers.
Drill safety warnings
>
Wear ear protectors when impact drilling.
Exposure to
noise can cause hearing loss.
>Use auxiliary handle(s), if supplied with the tool.
Loss of
control can cause personal injury.
>
Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory or
To Next Page
Loading...