What to do if my MacAllister MSID18-Li Impact Driver suddenly stops?
If your MacAllister Impact Driver suddenly stops, it might be due to several reasons: the product may be overloaded (remove it from the workpiece and switch it on again), the battery pack may be discharged (remove and charge the battery pack), or the battery might be too hot (remove the battery pack and let it cool down).
Why my MacAllister MSID18-Li Impact Driver does not start?
If your MacAllister Impact Driver does not start, ensure that the forward/reverse rotation control switch is pushed to the left or right, and not in the center lock position. Also, make sure the battery pack is properly attached and charged. If the battery pack is damaged or there is another electrical defect, have it checked by a specialist electrician.
How to troubleshoot low power on my MacAllister MSID18-Li?
If your MacAllister Impact Driver isn't reaching full power, it could be due to a low battery. Try charging the battery pack. Also, check if the air vents are blocked and clean them if necessary.
What to do if MacAllister MSID18-Li gives unsatisfactory results?
If you are getting unsatisfactory results with your MacAllister Impact Driver, the driver bit may be worn and needs replacing. Alternatively, the driver bit may not be suitable for the intended operation, so try using a more appropriate bit.
Covers general, electrical, and personal safety guidelines for safe operation of the impact driver.
Explains symbols and abbreviations used in the manual to help understand hazards and product features.
Identifies and labels the key components of the impact driver, battery, and charger.
Details performance data, voltage, capacity, dimensions, weight, sound, and vibration values of the tool.
Guides users through unpacking, checking contents, and preparing the tool for initial use.
Defines specific applications for the impact driver and explains its main functions like ON/OFF and speed control.
Outlines safe operation practices and specific techniques for screw driving with the impact driver.
Provides instructions for cleaning, maintaining, and storing the product to ensure its longevity and performance.
Offers solutions for common issues encountered with the product, guiding users on self-fixable problems.
Instructs on proper disposal of the product and battery pack, adhering to environmental regulations.
Details the 2-year warranty coverage, exclusions, and claim procedures for the MacAllister power tool.
Confirms product compliance with relevant European directives and standards for safety and EMC.
General| Brand | MacAllister |
|---|---|
| Model | MSID18-Li |
| Category | Impact Driver |
| Language | English |
To Next Page