GB USER GUIDE
About this guide
Package contents
• HRMOUNTPRO
• CAR4UAC
• User guide
How to use the HRMOUNTPRO4UAC
Safety intructions
1
Thank you for purchasing the Macally
HRMOUNTPRO4UAC, adjustable car seat headrest
mount with front and back seat car charger for
iPad/tablet .
Before you start using the Macally
HRMOUNTPRO4UAC, be sure to read this guide in
its entirety.
Please read the following carefully before using this
Macally product. Incorrect use of this product may
result in reduced performance, permanent
damage and void warranty:
1. Do not place this product near a heat source.
2. Operating temperature of 0°C to 30°C. Storage
temperature of -20°C to 60°C.
3. Do not place this product near moisture nor
liquids.
4. Operate and store at humidity of 10% to 90%
(non-condensing)
5. Do not place heavy objects on this product.
6. Do not drop this product.
7. Do not dispose this product in the garbage. Take
it to your local recycling centre.
1. Place the clamps of the mount on the
headrest posts and attach them firmly by
turning the knobs.
2. Place the cradle holder on the mount, either
behind the seat or at the end of the aluminium
frame for a centre view, until it clicks and it’s
securely attached.
3. Place the iPad/tablet cradle in the cradle
holder until it clicks and it’s securely
attached.
4. Press the release button on the side of
the cradle to completely expand the spring
loaded top grip, place your iPad/tablet in the
cradle and press down the top grip until your
iPad/tablet is securely held. You can also
expand the bottom grip to fit a larger iPad/tablet.
Clamp knobs
Clamp knobs
Cradle grip
release button
Clamps
Cradle holder
Aluminium
frame
Cradle holder
lock
Ball-head
screw cap
Frame extension
lock lever
iPad/tablet cradle
(5”/12,7 cm to 10”/25,4 cm)
Cradle grips
Front seat charger
1x USB-C (3A)
1x USB-A (2.4A)
POCKET CLIP
Back seat charger
2x USB-A (2.4A)
LEDPower Ring
6ft/ 1.8M
Cable
HRMOUNTPRO CLIP
To Next Page
Loading...
