MACAP M42D User Manual

MACAP srl
Via Toniolo 18 - 30030 - Maerne - (VE) - Italy - Tel. +39 041 5030466 Fax +39 041 5030477
www.macap.it - www.dynamometrictamper.com - info@macap.it
1
2
3
4
5
6
7
8
12
14
24
25
25A
15
16
17
18
19
20
21
22
23
13
6A
6B
3A
3B
3C
2A
2A
2B
2C
A
B
9A
9B
2C
0
I
Model
M42D
Evol.
Table
Date
1
1/5
08/01/2018
N.
Code
Features
A
C00071635
B
C00071636
1Kg
1
C00071638
2
C00071635A
2A
C00071637
2B
C00071635A1
2C
C0007M157C
3
C00020102
3A
C00071640
3B
C00020102Z
3C
C0004M139
4
C0004M135A
5
C00020103
6
C00041338
6A
C244046
6B
C00041338B
7
C248044
8
C00010108
9A
C00020107A
9B
C00020107B
10
C247058
11
C00041349
12
C00061635
230V-50/60Hz
C00061636
110V-60Hz
13
C00061107
230V-50/60Hz 10µ
C00061109
110V-60Hz 25µ
14
C00071641
15
C00010109
16
C00061021
17
C00061637
110/230V-50/60Hz
18
C0007M172
19
C00041344
20
C00071614
21
C00061612
22
C00061517
SHUKO
C000615171
USA
C000615172
UK
C000615173
SWITZERLAND
C000615174
AUSTRALIA
C000615175
BRAZIL
23
C00071642
24
C00071639
25
C00071636A
1Kg
25A
C00071636A1
1Kg
Descriptions
Available
Not available
11
10

MACAP M42D Specifications

General

Model	M42D
Burr Type	Flat
Motor Power	250 W
Power	250 W
Type	Coffee Grinder
RPM	1400
Voltage	220V
Frequency	50-60 Hz

Summary

Grinder Main Body and Burr Mechanism

Main Grinder Housing (Item 1)

The primary outer casing of the grinder, housing internal components.

Upper Burr Holder Assembly (Item 2)

The upper part that holds the burr, connecting to the hopper.

Lower Burr and Adjustment Assembly (Item 3)

The base assembly containing the lower burr and grind adjustment mechanism.

Grinder Base and Internal Frame Assembly

Base Plate and Support Structure (Items 1-5)

The foundational components providing stability and mounting points for the grinder.

Internal Frame Components (Items 6-14)

Various internal structural elements and mounting brackets for the grinder mechanism.

Grinding Adjustment Lever Mechanism

Grind Adjustment Lever Assembly (Items 1-3)

Components forming the lever used to adjust the grinding fineness.

Adjustment Lever Components (Items 4-7)

Specific parts like springs, pins, and levers for the adjustment system.

Tamper Components

Tamper Body and Base (Items 1-1E)

The main parts constituting the tamper, including the handle and base.

Portafilter Holder Assembly

Portafilter Holder Structure (Items 1-3)

The assembly that holds the portafilter during grinding or use.

Portafilter Holder Attachment (Item 4)

Component used for attaching or securing the portafilter holder.