The Swingan Two-Seater Glider is a playground accessory designed for children's outdoor play, intended to be attached to an existing swing frame. It functions as a two-person glider swing, allowing two children to swing together.
Function Description:
The glider provides a unique swinging experience, distinct from traditional single swings. It features two individual hand and foot grips, each connected to a shared bench seat. This design allows two children to sit facing each other, or in the same direction, and propel the glider through coordinated movements. The glider is designed for active play, encouraging children to use their legs and arms to create momentum.
Important Technical Specifications:
- Weight Limit: The total weight limit for this product is 220 lbs. This translates to a maximum of 110 lbs per child, assuming two children are using the glider simultaneously.
- Components: The kit includes:
- Glider Hand and Foot Grips: 2 units
- Glider Bench: 1 unit
- Glider Chains: 4 units
- Snap Hooks: 8 units
- Eye Bolts: 4 units
- Flat Washers: 12 units
- Lock Nuts: 6 units
- Hex Bolts: 2 units
- Installation Tools Required:
- Socket & Wrench
- Tape Measure
- Wrench
- Screwdriver
- Safety Clearance: A 6-foot safety area around the swing set is recommended by ASTM guidelines. This area should be level and free of obstructions such as plants, sheds, or trees.
- Ground Clearance: The glider swing should be hung at least 8 inches above the ground to ensure safe operation.
Usage Features:
- Two-Seater Design: Accommodates two children, promoting social interaction and cooperative play.
- Hand and Foot Grips: Each child has dedicated grips for hands and feet, providing stability and leverage for swinging.
- Attachment Versatility: The glider can be attached to a swing frame in two ways:
- Using 4 swing hangers in a rectangular formation.
- Using 2 swing hangers, with one chain from each swing handle attached to the same hanger.
- Interactive Play: Encourages children to engage their whole body in the swinging motion, enhancing physical activity and coordination.
- Supervision Required: Parents are advised to supervise children during play to ensure safe and intended use.
- Play Guidelines:
- Children should take turns, with only two on the glider at a time.
- Wait until the swing is dry before playing.
- No pushing, shoving, or roughhousing.
- Use the swing and chains only as intended.
- Never run in front of, behind, or between moving swings.
Maintenance Features:
- Pre-Play Checks: Always check the glider swing after a long period of inactivity. Do not use the swing if:
- There is visible damage to the swing.
- Components are missing.
- Chains are showing excessive wear.
- Hardware is loose.
- There are obstructions within the 6-foot safety area.
- Installation Checks: After installation, ensure all fastenings are secure, including those pre-secured by the manufacturer.
- Protective Surfacing: It is recommended to add a fall surface under the play structure to protect children in case of falls. Suitable materials include rubber mats, rubber mulch, wood chips, sand, or pea gravel.
- Assembly Instructions: The manual provides clear, step-by-step instructions for assembly:
- Step 1: Attaching the handles to the bench. This involves aligning the handle with the bench seat, sliding the bench end into a notch, and securing it with a hex bolt, flat washers, and a lock nut. The lock nut should be tightened until 3 threads of the bolt are visible. This process is repeated for the second handle.
- Step 2: Attaching the swing chains. This involves inserting a flat washer and eye bolt into the two holes on the top of each handle, securing from underneath with another flat washer and a lock nut. The lock nut should be tightened until 3 threads are visible beyond it, and the eye bolt should be perpendicular to the swing seat.
- Step 3: Attaching chains to eye bolts. Snap hooks are used to attach a chain to each of the 4 eye bolts.
- Step 4: Attaching to swing frame. The tops of the chains are then attached to the swing frame using either 4 swing hangers in a rectangular formation or 2 swing hangers, with one chain from each swing handle attached to the same hanger.
- Packaging Disposal: All packaging materials should be disposed of safely as they can be dangerous for children and present a choking hazard.
The Swingan Two-Seater Glider is part of the Machrus family of brands, emphasizing outdoor play and safety.
Need help?
General
To Next Page