BODY BUILDER INSTRUCTIONS
Mack Trucks
Body Builder; Engine, MP7, MP8, and MP10
CHU, CXU, GU, TD, MRU, LR
Section 2
Introduction
This information provides details for the MP7, MP8, and MP10 engines for MACK
vehicles.
Note: We have attempted to cover as much information as possible. However, this
information does not cover all the unique variations that a vehicle chassis may present.
Note that illustrations are typical but may not reflect all the variations of assembly.
All data provided is based on information that was current at time of release. However,
this information is subject to change without notice .
Please note that no part of this information may be reproduced, stored, or transmitted by
any means without the express written permission of MACK Trucks, Inc.
Contents:
• “Fuel and Oil”, page 2
• “Engine Overview”, page 3
• “Exhaust Aftertreatment System”, page 10
• “Heated Dump Bodies ”, page 25
• “Exhaust Back Pressure for US2010 and GHG2017 Engines”, page 26
• “MR/LR Exhaust Aftertreatment System Regeneration”, page 27
• “Dash Overview”, page 29
• “In-Transit Heat Cooling System ”, page 37
• “Fittings, Fuel Line, Replacement”, page 41
Mack Body Builder Instructions CHU, CXU, GU, TD, MRU, LR
USA139046859 Date 5.2017 Page 1 (43)
All Rights Reserved
To Next Page
Need help?
General
