Mackie DL Series Quick Start Guide

DL806 / DL1608
DL806 / DL1608
30
Navigation Bar
Navigation Bar: Presets
Tap the Presets button to display
a popover similar to what may be
seen below in Figure R. Here you
may select from a list of factory
presets for the current channel and
each DSP type, as well as save and
recall user presets. As seen in Figure
R, the Presets button illuminates
green when engaged. Tapping the
factory default button will reset the
current selection to its default state.
Tap Presets (again) to return to the
previous view.
Figure R – Presets
Navigation Bar: Shows
To the right of the Presets button
is the Shows button.
Tap Shows to display a popover
similar to what may be seen below
in Figure S. This is where you load
and save shows and snapshots and
also configure channel safes. As
seen in Figure S, the Shows button
illuminates green when engaged.
Snapshot 0 resets everything (except
channel images, solo and anything
selected in Channel Safes) to its
default state. Tap Shows (again) to
return to the previous view.
Notice that on all of these images
that the Navigation Bar is still
presented, regardless of what view
or popover may dominate the iPad.
Figure S – Shows
Navigation Bar: QAP
Finally, residing on the
far right of the Navigation
Bar is the Quick Access
Panel button [Figure T].
The Quick Access
Panel allows for fast
control over critical
functions such as clearing
solos, various effects
controls, mute group
control and view group
control.
All features of the
Navigation Bar are
discussed at greater length
in the Reference Guide.
Figure T
Quick Access Panel

Mackie DL Series Specifications

General

Brand	Mackie
Model	DL Series
Category	Music Mixer
Language	English