Mackie FireWire Specifications

36
ONYX FireWire Card
ONYX FireWire Card
37
Owner’s Manual
Owner’s Manual
Appendix B: Technical Info
Onyx FireWire Card Specications
Mic In to FireWire Card to DAW, routed back to FireWire Card to Control
Room Output; all signal path gain stages set to unity
Frequency Response
+0, –3 dB, 10 Hz to 42 kHz @ 96 kHz sample rate
+0, –1 dB, 10 Hz to 20 kHz @ 44.1 kHz sample rate
Distortion (THD+N)
< 0.025%, 10 Hz to 40 kHz, +4 dBu input @ 96 kHz sample rate
< 0.015%, 20 Hz to 20 kHz, +4 dBu input @ 96 kHz sample rate
< 0.010%, 20 Hz to 20 kHz, +4 dBu input @ 44.1 kHz sample rate
Dynamic Range
> 98 dB, 20 Hz to 20 kHz @ 96 kHz sample rate
> 100 dB, 20 Hz to 20 kHz @ 44.1 kHz sample rate
Main Mix Trim
+10 dB to –10 dB, unity detent
Dimensions
Height: 1.3 in/32 mm
Width: 8.8 in/222 mm
Depth: 3.6 in/91 mm
Weight: 8.3 oz./235 g
LOUD Technologies Inc. is always striving to improve our products by
incorporating new and improved materials, components, and manufacturing
methods. Therefore, we reserve the right to change these specications at
any time without notice.
“Mackie.”, “Onyx,” and the “Running Man” are registered trademarks of
LOUD Technologies Inc. All other brand names mentioned are trademarks or
registered trademarks of their respective holders, and are hereby acknowl-
edged.
©2004 LOUD Technologies Inc. All Rights Reserved.

Mackie FireWire Specifications

Frequency Response

frequency response at 96 kHz sample rate	+0, –3 dB, 10 Hz to 42 kHz
frequency response at 44.1 kHz sample rate	+0, –1 dB, 10 Hz to 20 kHz

Distortion

distortion at 96 kHz sample rate	< 0.025%, 10 Hz to 40 kHz, +4 dBu input
distortion at 96 kHz sample rate (20 Hz to 20 kHz)	< 0.015%, +4 dBu input
distortion at 44.1 kHz sample rate	< 0.010%, 20 Hz to 20 kHz, +4 dBu input

Dynamic Range

dynamic range at 96 kHz sample rate	98 dB, 20 Hz to 20 kHz
dynamic range at 44.1 kHz sample rate	100 dB, 20 Hz to 20 kHz

Weight and Dimensions

height	1.3 in/32 mm
width	8.8 in/222 mm
depth	3.6 in/91 mm
weight	8.3 oz./235 g