Need help?Do you have a question about the Mackie FireWire and is the answer not in the manual?
Frequency Response| frequency response at 96 kHz sample rate | +0, –3 dB, 10 Hz to 42 kHz |
|---|---|
| frequency response at 44.1 kHz sample rate | +0, –1 dB, 10 Hz to 20 kHz |
Distortion| distortion at 96 kHz sample rate | < 0.025%, 10 Hz to 40 kHz, +4 dBu input |
|---|---|
| distortion at 96 kHz sample rate (20 Hz to 20 kHz) | < 0.015%, +4 dBu input |
| distortion at 44.1 kHz sample rate | < 0.010%, 20 Hz to 20 kHz, +4 dBu input |
Dynamic Range| dynamic range at 96 kHz sample rate | 98 dB, 20 Hz to 20 kHz |
|---|---|
| dynamic range at 44.1 kHz sample rate | 100 dB, 20 Hz to 20 kHz |
Weight and Dimensions| height | 1.3 in/32 mm |
|---|---|
| width | 8.8 in/222 mm |
| depth | 3.6 in/91 mm |
| weight | 8.3 oz./235 g |
Discusses hard drive speed considerations for optimal audio recording performance.
Instructions for installing PC drivers and control panel software.
Instructions for Mac setup, driverless operation, and system recognition.
Diagram for live multitrack recording from Onyx 1640 to laptop via FireWire.
Diagram for multitrack recording and mixdown monitoring with Onyx 1640.
Diagram for multitrack recording with six monitor mixes using Onyx 1640.
Diagram for recording keyboards and synths from Onyx 1620 to laptop.
Guide for live sound recording setup and execution.
Guide for studio recording setup and execution.
Instructions for adding new vocal parts over existing recordings.
Instructions on how to export the final stereo mixdown file.
Details concerning warranty coverage and service procedures.
Guidance on resolving common audio issues like no audio, glitches, and reversed inputs.
Instructions and contact information for sending the product for repair.
Lists key technical parameters like frequency response, distortion, and dynamic range.
To Next Page
