To Next PageTo Next Page
Need help?Do you have a question about the Mackie ProFX22v3 and is the answer not in the manual?
General| Type | Analog |
|---|---|
| Channels | 22 |
| Phantom Power | Yes |
| USB | Yes |
| Computer Connectivity | USB |
| A/D Resolution | 24-bit/192kHz |
| Headphone Output | 1 x 1/4" |
| Mic Preamps | 17 Onyx mic preamps |
| EQ Bands | 3-band |
| Effects | 24 |
| USB Interface | 2x4 USB |
| Outputs - Main | 2 x XLR |
| Effects Engine | 24 |
| Main Outputs | 2 x XLR |
Covers reading instructions, avoiding water, proper cleaning, and general warnings.
Addresses plug safety, cord protection, and avoiding electrical hazards.
Emphasizes that only qualified personnel should perform servicing.
Warning about potential hearing loss from high noise levels and recommendation for hearing protection.
Features Onyx preamps for premium sound and GigFX for creative sound enhancement.
Details the 24-bit/192kHz USB interface for recording and latency-free monitoring.
Describes the USB interface for recording and playback routing options.
Explains 48V phantom power, its global control, and usage precautions.
Details input channels 1 and 2, their compatibility, and wiring.
Covers XLR mic inputs, Onyx preamps, and handling of mic levels.
Guides setting input gain using knobs and LEDs for optimal signal levels.
Explains the in-line compressor for controlling dynamic range and reducing distortion.
Activates 48V phantom power for condenser microphones; affects all XLR inputs.
Adjusts levels for subgroup outputs and assigns channels to subgroups.
Controls the final stereo output level sent to main line outputs.
Steps to diagnose and resolve issues related to the mixer not powering on.
Guidance on identifying and eliminating hum noise, potentially from ground loops.
Steps to diagnose problems with individual channels, including signal routing and levels.
Procedures for diagnosing and resolving scenarios where no sound is produced.
Tips for identifying and reducing unwanted noise in the audio signal path.
Provides contact methods for technical assistance, email, and phone support.
Details on obtaining warranty and non-warranty repair services.
Details specifications for noise, distortion, frequency response, and crosstalk.
Details the limited product warranty terms, conditions, and coverage.
Information on obtaining help, including FAQs, manuals, and contact details.
