Do you have a question about the Mackie ProFX12v3 and is the answer not in the manual?
Channels | 12 |
---|---|
USB Interface | 2x4 24-bit/192kHz |
Faders | 60mm |
Computer Connectivity | USB |
EQ | 3-band EQ |
Effects | 24 Built-in FX |
Phantom Power | Yes |
Aux Sends | 1 Aux Send |
Headphone Output | 1 x 1/4" |
Inputs - Line | 12 |
Outputs - Main | 2 x XLR |
USB | Yes |
Software | Pro Tools First, Waveform OEM |
Mic Preamps | 7 Onyx Mic Preamps |
Overview of the Mackie ProFXv3 Series mixers and their capabilities.
Step-by-step guide to quickly set up the ProFXv3 mixer for initial use.
Details on connecting the power supply to the mixer and AC outlet.
Information on locating and operating the mixer's power switch.
Explains the USB interface for recording and playback routing.
Describes the line-level stereo outputs for connecting amplifiers or speakers.
Details on providing 48V phantom power to condenser microphones.
Describes input channels 1 and 2 for mic or line-level signals.
Details on Hi EQ, Mid EQ with frequency, and Low EQ controls for tone shaping.
Details on noise characteristics, distortion, equalization ranges, and maximum output levels.
Technical data on input/output impedances and maximum signal levels.