Need help?Do you have a question about the Mackie ProFX4v2 and is the answer not in the manual?
General| Type | Analog |
|---|---|
| Channels | 4 |
| Microphone Preamps | 2 |
| Phantom Power | Yes |
| EQ Bands | 2-band |
| Effects | Yes |
| USB Interface | Yes |
| Built-in Effects | 16 |
| Aux Sends | 1 |
Warning about risk of electric shock and not opening the unit.
Warning against exposing the apparatus to rain or moisture.
Connects AC power cord and controls mixer power on/off.
Provides 48V phantom power to all XLR jacks simultaneously.
Connects a balanced mic or line-level signal via an XLR connector.
Allows guitar connection to channel 1 without a DI Box.
Connects balanced/unbalanced line-level signals using a 1/4" connector.
Adjusts the input sensitivity for optimal signal level.
Cuts bass frequencies below 100 Hz at 18 dB/octave.
Boosts or cuts specific frequencies to shape the sound.
Assigns channel 1 hard left and channel 2 hard right.
Adjusts the channel's level in the main mix.
Connects to amplifiers, powered speakers, or serial effects processors.
Adjusts signal level to main and tape outputs.
Connects stereo headphones using a 1/4" connector.
Controls the headphone output level.
RCA connections for line-level sources and main stereo mix recording.
Controls input level for sources connected to tape inputs.
Adjusts main mix or monitor output signal.
Selects GEQ for main mix or monitors.
Quickly engages or disengages the graphic EQ.
Gauge main output level to prevent clipping.
Feed stage monitors via mon send jacks; controls overall output level.
Feeds internal FX or external processor via FX send jack.
Selects effects, displays preset number, mutes internal FX.
Routes effects output to monitors and mains independently.
Measures residual output noise and signal-to-noise ratio.
Details the mixer's frequency range for various inputs/outputs.
Specifies total harmonic distortion plus noise levels.
Measures signal attenuation and crosstalk between inputs/outputs.
Indicates maximum output signal levels for various connections.
Specifies the voltage and current required for operation.
Provides the physical dimensions of the mixer.
Indicates the total weight of the mixer.
Locate warranty coverage information for your local market.
Download a full-version, printable owner's manual for your product.
Get the latest software, firmware, and drivers for your product.
Register your product to activate coverage and receive updates.
Reach out to the technical support department for assistance.
To Next Page
