Need help?Do you have a question about the Mackie Thump 12 and is the answer not in the manual?
General| Speaker Type | Powered Loudspeaker |
|---|---|
| Woofer Size | 12 inches |
| Tweeter Size | 1.4 inches |
| Enclosure Material | Polypropylene |
| Frequency Response | 50 Hz - 20kHz |
| Inputs | XLR |
| Outputs | XLR |
Covers warnings and cautions regarding electric shock, fire, and proper operational safety.
Instructions on the environmentally sound disposal of the product according to WEEE directive.
Details the high-output 1000W system power and efficient Class-D amplification.
Highlights woofer size, titanium dome compression driver, and dynamic bass response.
Covers crossover, transducer time alignment, and system protection features.
Describes EQ, mic/line input, mounting options, and stage monitor use.
Focuses on rugged polypropylene construction and weight specifications.
Guide on navigating the manual's sections and initial setup steps.
Key advice for setup and operation to avoid common issues and ensure best performance.
Illustrates connecting a mixer directly to two loudspeakers for a small venue.
Shows integrating a subwoofer with loudspeakers for enhanced bass in a small venue.
Diagrams a DJ setup using a laptop, subwoofers, and loudspeakers for playback.
Explains using the THRU output connector to link multiple speakers in series.
Details a complex system with multiple subwoofers and monitor speakers for large clubs.
Describes the IEC power connector, AC outlet matching, and rocker switch.
Explains the function of the green power status LED on the front and rear.
Details the combo jack for XLR and 1/4" inputs, handling mic and line signals.
Describes the male XLR connector used for daisy-chaining signal.
Explains gain control, overload indication, and input signal handling limits.
Details the controls for shaping bass and midrange frequencies.
Explains the knob for adjusting the midrange EQ center frequency.
Details the control for shaping treble frequencies and reducing hiss.
Provides recommended EQ adjustments for common audio applications.
Instructions on floor placement, pole-mounting, and avoiding suspension.
Advice for cleaning, avoiding moisture, and temperature extremes for longevity.
Explains internal circuits protecting against distortion and woofer damage.
Details automatic shutdown for overheating and its signal muting reset mechanism.
Discusses voltage, amperage, and the importance of a stable power supply.
Guides users through diagnosing and resolving power, sound, noise, and hum problems.
Provides details on warranty service, locating service centers, and contacting tech support.
Details wiring for balanced/unbalanced XLR and 1/4" inputs and combo jacks.
Explains the wiring standards for the male XLR output connector.
Lists frequency response, SPL, power amplifiers, and crossover details.
Covers dimensions, weight, mounting methods, and available optional accessories.
Explains how to keep receipts, contact for service, and find technical support.
To Next Page